O-Select מכונת מדידה אופטית

מכונת מדידה אופטית O-SELECT Digital measuring projector

מדידה מהירה ואוטומטית בלחיצת כפתור אחת. 

מכונת מדידה אופטית לדו מימד: זיהוי החלק הנמדד והטענה אוטומטית של תכנית המדידה המתאימה, לרבות קביעה אוטומטית של יישור ותאורה אופטימליים לתהליך.

מתאימה לתעשיית הרכב, האלקטרוניקה, פלסטיקה, ולתעשיות רבות נוספות, ומאפשרת בדיקת דיוק מימדי של מרחקים, רדיוסים או זוויות.

מתאימה למדידות בקו ייצור ובמעבדת הבטחת איכות.

ZEISS O-SELECT makes the optical measurement of parts easy and reliable.

Reliably measure at the push of a button

Thanks to fully automatic setting of both illumination and focus, measuring errors due to operator influence are eliminated. At the mere push of a button, ZEISS O-SELECT evaluates the characteristics and documents the results – also in a professional report if needed.

In production environments, optical and contact coordinate measuring machines are increasingly replacing manual equipment such as goniometers, gauges and profile projectors. However, the influence of the operator with these manual tools must not be disregarded. With O-SELECT, ZEISS is reducing this influence to a minimum. Thanks to its high level of automation and ease of use, complex measurements can be completed quickly, traceably and reproducibly.

Serial measurement at the press of a button

Parts for which a measuring plan has already been generated can be tested with ZEISS O-SELECT at the press of a button. The system identifies the positioned part and loads the appropriate program automatically. The alignment is also automatic. ZEISS O-SELECT sets the optimal illumination and focuses automatically. This not only lightens the operator's workload, but also makes the measurement operator-independent and reproducible. If required, the reliable result is automatically output or printed in a report.

o-select Zeiss

Fields of application

Whether it is used in the automotive, electronics or plastics processing industries, ZEISS O-SELECT provides precisely the simplicity and reliability needed in today's industrial environment. The digital measuring projector is particularly suitable for checking the dimensional accuracy of distances, radii or angles. Common test parts include punched and bending parts, or injection-molded and laser-cut workpieces.

Automatically focused

Incorrect focusing may lead to measuring errors of several micrometers. In manual focusing an error is easily made, unnoticed by the operator. To eliminate this source of error, ZEISS O-SELECT automatically identifies the characteristics to be tested and sets the focal plane accordingly. In other words, operator errors are eliminated.

Automatically the best light

Optical measurement can only succeed if the illumination is right. To ensure that each characteristic is seen in the best possible light, ZEISS O-SELECT offers a variable illumination system. The illumination is set automatically to each characteristic, ruling out any possibility of operator error.

Machine size 402 mm x 510 mm x 727 mm (W x D x H)
Size of measuring field 114 mm x 91.5 mm (without shifting table), 214 mm x 91.5 mm (with shifting table)
System components Digital measuring projector, workstation, monitor screen, ZEISS NEO select software

 


תיאור

Zeiss O-Select מכונת מדידה אופטית

 


לקבלת הצעת מחיר ומידע נוסף
Fields marked with an * are required